Ethernet Extender Kit (2pc) TEX-100 VDSL2 is a high-speed, Long Reach Ethernet Booster/LAN Repeater with one RJ45 Ethernet port and one RJ45 VDSL port. Bridge modem use VDSL2 technology to extend ethernet wire service over single-pair phone line or CAT5 cable, CAT6 cable. VDSL2 Ethernet Extender features 100Mbps of symmetric data rate over telephone/phone wire or ethernet cable kit.
Use two TEX-100 VDSL2 Extenders (Sender/Receiver) in CO and CPE mode to establish a point-to-point connection extension in your network.
-Support flow control on Fast Ethernet port via PAUSE frame or Back Pressure
-IEEE 802.1Q VLAN tag transparent
-Easy PnP installation network booster broadband distance range extender
-Selectable CPE and CO mode and VDSL2 profile (17a or 30a) via DIP switch are built in the ethernet repeater
-Ethernet bridge VDSL2 profile mode (17a or 30a) for high data rate
-Symmetric mode support the band plan G.997 and provide the symmetric transmission on both down and upstream
-Asymmetric Provides highest line rate in short range
-Selectable target SNR margin
-Network Extender DIP Switch:CO/CPE mode,30a/17a Profile,Symmetric or Asymmetric,SNR margin 6dB/9dB
-LAN Extender Interface:RJ-45,IEEE 802.3/802.3u/802.3x,10/100 Base-T Auto-Negotiation,Auto-MDI/MDI-X
-VDSL Interface:RJ-45,DMT Encoding,ITU-T G993.1/993.2/G.997.1,Surge Protector
Performance - AWG24 LAN Cable/Phone Cable Wire:
17a VDSL Profile-Down/Up stream
30a VDSL Extender
The actual data may vary depending on copper wire and environment.
Ethernet Extender Kit (Sender/Receiver) up to 7000FT (One Mile) Distance Away Reach Range Extender - Tupavco TEX-100 Pair - VDSL2 Bridge Modem Network Repeater Range Distance up to 1 Mile/7000FT over Single Pair Phone Copper Wire or CAT5 cable / CAT6 cable kit - VDSL High Speed Broadband - Lan Network Booster/Repeater. Ethernet Cable Extender allows connectivity extension by using over existing copper phone wire where new cabling or wireless network extender are not possible
TEX-100 Ethernet Booster is VDSL extender/Ethernet bridge, not VDSL/DSL internet router or modem. User manual and instructions are included on the CD with the extender and the manual and instructional PDF can be downloaded from the listing page. Please make sure that the product fits your application and that is LAN network transfer to the remote location over single pair phone cable wire or over the RJ45 ethernet wire LAN cable.
Plug and Play Easy Install Extenders - No Driver or Software Installation needed - 100/100Mbps for both Upstream and Downstream within 1000FT or 22/19 Mbps for 3000FT long range connections over RJ-45 or telephone line cooper cord - Compatible with third party DSLAM - IEEE 802.1Q VLAN tag transparent
TEX-100 Ethernet Repeater has selectable CPE and CO mode via DIP switch - Selectable VDSL2 profil mode (17a or 30a) - Selectable target band plan: Symmetric/Asymmetric - Selectable target SNR margin (6dB or 9dB)
LAN Extender brings High Speed Broadband to Motels, Hotels, Clinics, Hospitals, Apartment Buildings, Schools, Dorms and other Facilities. With its high performance and plug-n-play design, TEX-100 VDSL2 Ethernet Extender is the ideal Long Reach Ethernet solution for ISP and carriers to quickly deploy a high-speed IP-based network for triple play (video, voice and data) services.