PLUSPOE 48 volt Power over Ethernet PoE Injector Adapter with 2-ports PoE out Max 48 watts for 2 IP Cameras, VOIP Phones or Access Points and other 10/100M 802.3af Devices

Price:
Product prices and availability are accurate as of 2019-11-22 07:04:17 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The Dual Ports Power over Ethernet Injector, combines electrical power with a 10/100Mbps network connection to produce a Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Feet) to network PoE devices.

Specifications

4 RJ45 Ethernet ports (2 PoE ports)
48 volt 1.0Amp 48watt power output, 24 watt each port
Power feed: V+ 4,5; V- 7,8;
Deliver power up to about 328.1 feet(100 meters)
Support 100-240V voltage input

Package content?
1 x PLUSPOE Dual Ports PoE injector 48v48w
1 x US power cord

Product Features

Remote power up to 2 10/100Mbps Access points, phones or cameras Thru CAT.5,6,7 Cable up to 328.1 feet(100 meters) Powers 802.3af devices up to 24 watts average each; built in total 48 volt 48 watt PoE power for 802.3af devices Short Circuit, Over Current and Over Voltage Protection Passive Power over Ethernet (PoE) technology; power is always on to all 2 outlets Easy installation with its Parallel Slide-in Design for Multiple Units

Write a Review