Fluke Networks DTX-LT 120 CableAnalyzer

Price:
Product prices and availability are accurate as of 2018-06-18 06:52:23 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The Fluke Networks DTX-LT 120 CableAnalyzer performs tests of copper networks at bandwidths up to 350 MHz that comply with industry standards including TIA, ISO/IEC, EN, ANSI, and IEEE. Testing includes shielded and unshielded twisted pair LAN cabling. The meter includes one DTX-LT unit and one smart remote. The DTX module cavity accepts additional test modules as network testing needs and requirements change, including fiber and network service modules. The unit supports coaxial adapters, custom limits, and talk between operators at the main and remote units (headphones not included). A wiremap test can be performed to verify that cables are installed correctly. The permanent link adapter provides repeatable accuracy and Category 5e and Category 6 interoperability. The user-selected test standard automatically determines the test parameters and frequency range for the performed tests. Autotests can be started from the main or remote unit. The fiber autotest performs a dual-fiber, dual-wavelength certification test. The backlit, passive color, LCD display has a diagonal measurement of 3.7 in/9.4 cm and a resolution of 240 x 320 pixels (W x H). Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks.

The meter stores up to 250 sets of test results (graphical Category 6). An autosave function ensures that test results are captured and saved. Results can be downloaded to a computer for long-term records retention, or imported to the LinkWare software for analysis and generation of certification reports to provide evidence that the installation has been completed according to standards and best practices (software and USB cable included).

Specifications
Standard link interface adapters (shielded and unshielded twisted-pair LAN cabling)TIA Category 3, 5, 5E, and 6: 100 ?
ISO/IEC Class C and D: 100 ? and 120 ?
ISO/ IEC Class E: 100 ?
Supported test parameters (selected standard automatically determines the test parameters and frequency range)Wire Map; Length; Propagation Delay; Delay Skew; DC Loop Resistance; Insertion Loss (attenuation); Return Loss (RL), RL @ Remote; NEXT, NEXT @ Remote; Attenuation-to-crosstalk Ratio (ACR-N), ACR-N @ Remote, ACR-F (ELFEXT), ACR-F @ Remote; Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote; Power Sum NEXT, PS NEXT @ Remote; Power Sum ACR-N, PS ACR-N @ Remote
Autotest speedFull two-way autotest of Category 6 Twisted-Pair links in less than 30 seconds
Results storage250 qualification test results (graphical Category 6)
Data outputUSB interface
Agency safety certifications and approvalsCSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition Amendments 1, 2; EN 61326-1; Pollution Degree 2
Power source (main and remote units)7.4V lithium-ion battery pack, 4000 mAh, with 108 VAC to 132 VAC adapter/charger
Weight2.4 lb/1.1 kg, nominal (without adapter or module)
Dimensions (main unit and remote)8.5 x 4.4 x 2.4 in/21.6 x 11.2 x 6 cm (H x W x D)

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments.

Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA.

What's in the Box?

  • Fluke Networks DTX-LT main
  • Fluke Networks smart remote
  • (2) Category 6A/Class EA permanent link adapters
  • (1) Category 6A/Class EA channel adapter
  • (2) AC chargers
  • LinkWare PC Software CD
  • USB interface cable (Mini-B)
  • Carrying case
  • User Manual

Product Features

Copper cable certification tester performs extended certification of high-speed networks to 350 MHz Performs Category 6 autotest on shielded and unshielded twisted pair LAN cabling (STP, FTP, SSTP, and UTP) Stores up to 250 qualification test results and downloads results to a computer for analysis and generation of network certification reports Talk features enable operators to communicate between the main and remote units

Write a Review