ESPixelStick - Wireless DMX Pixel Controller Kit

Price:
Product prices and availability are accurate as of 2019-06-24 12:21:03 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The ESPixelStick is an E1.31 WiFi pixel controller built around the ESP8266 in an Arduino environment. Please note that this item is a kit and requires programming by the end user. The ESPixelStick supports up to four universes of WS2811 pixels on a single output, or up to 63 GECE Pixels. The firmware is open source, available here. Once connected to your WiFi network, further configuration can be done via the embedded web server. The controller is small enough to fit inside 1? thin wall PVC, allowing you to embed the controller next to your element eliminating issues of long pixel runs. The ESPixelStick V2 is provided in kit form, with all components pre-soldered. Full instructions for programming and usage can be found on forkineye.com.

Product Features

Provided in Kit form - MUST BE PROGRAMMED No soldering required Supports sACN DMX (E1.31) over 802.11b/g/n Networks Supports up to 680 WS2811 or WS2812 Pixels - 4 Universes of DMX data Supports up to 63 GECE Pixels

Write a Review