The WG602 employs a web-based interface for configuration, allowing you to adjust settings such as the beacon interval, RTS threshold, and DTIM interval. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
Fast and Secure
Supporting the 802.11g standard, the NETGEAR WG602 offers data speeds of up to 54 Mbps, making it possible to share a broadband internet connection, stream music without hiccups, watch videos with less load time, and videoconference without problems. Downloading files is up to five times faster than it was with 802.11b. If you still have computers that use 802.11b, don't fret as the access point is backwards compatible with the older wireless standard and can be set so all your computers can connect to the network and the WG602 will automatically figure out the connection type and work accordingly.
The WG602 offers many security options to ensure your data is private. Both 40/64-bit and 128-bit WEP encryption is available, as well as Wi-Fi Protected Access (WPA2-PSK). You can also use MAC address authentication to allow only authorized users onto the network.
Bridge and Repeater Mode
In addition to functioning as an access point, the WG602 can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANS wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
The NETGEAR WG602 54 Mbps Wireless Access Point is backed by a 1-year warranty.
What's in the Box
WG602 54 Mbps Wireless Access Point, vertical stand, power adapter, Ethernet cable, resource CD, user's guide, warranty/support information card.