Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Companion to your ScopeMeter, power quality meter or digital multimeter to measure up to 200A AC. Included adapter for DMM's. Two ranges: 20 A and 200A, 10 or 100 mV/ Amp output. Take accurate current readings without breaking the circuit. Maximum conductor diameter 20mm. CAT III 600V safety rating. Nominal current range: 20A, 200A. Continuous current range: 0.1A - 24A, 0.5A - 200A. Maximum non-destructive current: 240A. Lowest measurable current: 0.1A. Basic accuracy: 1.5 percent +0.5 A (48-65 Hz) (percent reading + floorspec). Useable frequency: 40 Hz - 10 kHz. Output levels: 100 mV/A, 10 mV/A. Maximum conductor size (busbar): 20 x 5mm. Output cable length: 2.0m.
Companion to your ScopeMeter, power quality meter or digital multimeter to measure up to 200 A AC
Included adapter for DMM's
Two ranges: 20A and 200A, 10 or 100 mV/amp output
Take accurate current readings without breaking the circuit, maximum conductor diameter 20mm, CAT III 600V safety rating
1 year warranty